This page explains advanced uses of Notary client for users who are running their own Notary service. Make sure you have first read and understood how to run your own Notary service before continuing.
This document’s command examples omit the
-d flags. If you do not
know what these options do, please read the Getting
Started docs or run
notary --help before continuing. Once
you understand what these flags do, you must provide your own values for these
options while following this document. You can also configure these options, see
advanced configuration options for more information.
Before adding and signing content to a collection, you must first initialize that collection.
$ notary init example.com/collection No root keys found. Generating a new root key... You are about to create a new root signing key passphrase. This passphrase will be used to protect the most sensitive key in your signing system. Please choose a long, complex passphrase and be careful to keep the password and the key file itself secure and backed up. It is highly recommended that you use a password manager to generate the passphrase and keep it safe. There will be no way to recover this key. You can find the key in your config directory. Enter passphrase for new root key with ID 1f54328: Repeat passphrase for new root key with ID 1f54328: Enter passphrase for new targets key with ID 1df39fc (example.com/collection): Repeat passphrase for new targets key with ID 1df39fc (example.com/collection):
Initializing a trusted collection will generate the following items; all keys use asymmetric algorithms, but there is no requirement that they all use the same algorithm:
It’s simple to add targets to a trusted collection with notary CLI:
$ notary add example.com/collection v1 my_file.txt
The above command adds the local file
my_file.txt (this file must exist relative to the current working directory) under the target name
v1 to the
example.com/collection collection we set up. The contents of the local file are not actually added to the collection - a “target” consists of the
file path and one or more checksums of the contents.
Note that this is an offline command, and we must run a
notary publish example.com/collection for the add to take effect.
To remove targets, we use the
notary remove command, specifying the GUN and target name.
$ notary remove example.com/collection v1
Removing a target is also an offline command that requires a
notary publish example.com/collection to take effect.
By default, the notary client is responsible for managing the private keys for
root, targets, snapshot roles. All of these keys are generated by default when
initializing a new trusted collection. The keys are located in the notary
directory. In addition, if delegation roles exist, those roles’ keys are to also
managed by the notary client.
The notary server is always responsible for managing the timestamp key. However, it is possible for the notary server to manage the snapshot key, if the snapshot key is rotated from the notary client to server, as described in the following subsection.
In case of potential compromise, notary provides a CLI command for rotating keys. Currently, you can use the
notary key rotate command to rotate the targets or snapshot keys.
While the snapshot key is managed by the notary client by default, use the
rotate snapshot -r command to rotate the snapshot key to the server, such that the
notary server will then sign snapshots. This is particularly useful when using
delegations with a trusted collection, so that delegates will never need access to the
snapshot key to push their updates to the collection.
Note that new collections created by a Docker 1.11 Engine client will have the server manage the snapshot key by default.
To reclaim control of the snapshot key on the client, use the
notary key rotate command without the
The targets key must be locally managed - to rotate the targets key, for instance in case of compromise, use the
notary key rotate targets command without the
Notary can be used with Yubikey 4 keys, via a PKCS11 interface when the Yubikey has CCID mode enabled. The Yubikey will be prioritized to store root keys, and will require user touch-input for signing. Note that Yubikey support is included with the Docker Engine 1.11 client for use with Docker Content Trust.
Yubikey support requires Yubico PIV libraries (which are bundled with the PIV tools) to be available in standard library locations.
Delegation roles simplify collaborator workflows in notary trusted collections, and also allow for fine-grained permissions within a collection’s contents across delegations. In essence, delegation roles are restricted versions of the targets role that are only allowed to sign targets within certain filepaths.
A delegation role is given its own keys, such that each collaborator can keep his own private key without the administrator having to share the targets key or allow a collaborator write access to all targets of the collection.
Before adding any delegations, you should rotate the snapshot key to the server. Note that this is done by default for new collections created with a Docker Engine 1.11 client. This is such that delegation roles will not require the snapshot key to publish their own targets to the collection, since the server can publish the valid snapshot with the delegation targets:
$ notary key rotate example.com/collection snapshot -r
-r specifies to rotate the key to the remote server.
When adding a delegation, your must acquire a x509 certificate with the public key of the user you wish to delegate to. The user who will assume this delegation role must hold the private key to sign content with notary.
Once you’ve acquired the delegate’s x509 certificate, you can add a delegation for this user:
$ notary delegation add example.com/collection targets/releases cert.pem --paths="delegation/path"
The preceding example illustrates a request to add the delegation
targets/releases to the GUN
example.com/collection. The delegation name must
be prefixed by
targets/ to be valid, since all delegations are restricted
versions of the target role. The command adds the public key contained in the
cert.pem to the
targets/releases delegation role to sign content, the delegation user
must possess the private key corresponding to this public key. This command
restricts this delegation to only publish content under pathnames prefixed by
delegation/path. With the given path of “delegation/path”, the
role would be able to sign paths like “delegation/path/content.txt”, “delegation/path_file.txt”
and “delegation/path.txt”. You can add more paths in a comma-separated list under
--paths, or pass the
--all-paths flag to allow this delegation to publish
content under any pathname.
After publishing, you can view delegations using a list command:
$ notary delegation list example.com/collection ROLE PATHS KEY IDS THRESHOLD --------------------------------------------------------------------------------------------------------------- targets/releases delegation/path 729c7094a8210fd1e780e7b17b7bb55c9a28a48b871b07f65d97baf93898523a 1
You can see the
targets/releases with its paths and key IDs. If you wish to modify these fields, you can do so with additional
notary delegation add or
notary delegation remove commands on this role.
A threshold of
1 indicates that only one of the keys specified in
KEY IDS is required to publish to this delegation. Thresholds other than 1 are not currently supported. To remove a delegation role entirely, or just individual keys and/or paths, use the
notary delegation remove command:
$ notary delegation remove example.com/user targets/releases Are you sure you want to remove all data for this delegation? (yes/no) yes Forced removal (including all keys and paths) of delegation role targets/releases to repository "example.com/user" staged for next publish.
You can remove individual keys and/or paths by passing keys as arguments, and/or
paths under the
--paths flag. Use
--all-paths to clear all paths for this
role. If you specify all key IDs currently in the delegation role, you will
delete the role entirely.
To add targets to a specified delegation role, we can use the
command with the
You must have imported an appropriate delegation key for this role. To do so,
you can run
notary key import <KEY_FILE> --role user with the private key PEM
file, or drop the private key PEM in
role PEM header set to
$ notary add example/collections delegation/path/target delegation_file.txt --roles=targets/releases
In the preceding example, you add the target
example/collections staged for next publish. The file
delegation_file.txt is a target
delegation/path/target using the delegation
targets/releases. This target’s path is valid because it is prefixed by
the delegation role’s valid path.
notary list and
notary remove commands can also take the
to specify roles to list or remove targets from. By default, this operates over
To remove this target from our delegation, use the
notary remove command with
the same flag:
$ notary remove example/collections delegation/path/target --roles=targets/releases
Docker Engine 1.10 and above supports the usage of the
delegation as the canonical source of a trusted image tag, if it exists.
docker pull with Docker Content Trust on Docker Engine 1.10,
Docker will attempt to search the
targets/releases role for the signed image tag,
and will fall back to the default
targets role if it does not exist. Please note
that when searching the default
targets role, Docker 1.10 may pick up on other
targets/releases delegation roles’ signed images if they exist for this tag.
In Docker 1.11, this behavior is changed such that all
docker pull commands with
Docker Content Trust must pull tags only signed by the
targets/releases delegation role
targets base role.
docker push with Docker Content Trust, Docker Engine 1.10 will
attempt to sign and push with the
targets/releases delegation role if it exists,
otherwise falling back to the
targets role. In Docker 1.11, a
docker push will
instead attempt to sign and push with all delegation roles directly under targets
targets/role but not
targets/nested/role) that the user has signing keys for.
If delegation roles exist but the user does not have signing keys, the push will fail.
If no delegation roles exist, the push will attempt to sign with the base
To use the
targets/releases role for pushing and pulling images with content trust,
follow the steps above to add and publish the delegation role with notary.
When adding the delegation, the
--all-paths flag should be used to allow signing all tags.
Notary stores state in its
trust_dir directory, which is
default or usually
~/.docker/trust when enabling docker content trust. Within this
trusted_certificates stores certificates for bootstrapping trust in
tuf stores TUF metadata and changelists to be applied to a GUN,
private stores private keys.
root_keys subdirectory within
private stores root private keys, while
tuf_keys stores targets, snapshots, and delegations private keys.
Пожалуйста, авторизуйтесь что бы оставлять комментарии.